Concrete and Mortar
Exterior Coatings
Professional Sealants
Roof Waterproofing
Substructure Waterproofing
Tiling and Grouting
Water Tanks and Other Areas
Wet Areas
| PROPERTIES | STANDARD | RESULTS |
|---|---|---|
| Mixing Ratio (By weight) | 1:2 (Part A liquid : Part B powder) | |
| Bulk Density of Powder | In House | 1.6 – 1.8 |
| Mixed Density Of Wet Mix, gm/ml | In House | 1.7 – 1.80 |
| Set to Touch Time at 25°C | In House | 45 min. |
| Water Absorption | In House | < 6 % |
| Adhesion to concrete after 7 Days | ASTM D 4541 | ≥ 1 mPa |
| Positive Hydrostatic Pressure | EN-12390 Part-8 | Pass |
| Tensile Strength – on casting | ASTM D 412 | upto 1MPA |
| Elongation at Break (%) | ASTM D 412 | Min. 60% |
| Crack Bridging | EN1062-7 | Upto 1 mm |
| WFT* ( 2 Coats ) | 1000 - 1200 micron | |
| DFT* ( 2 Coats ) | 800 - 1000 micron | |
| Food Grade Certification | CFTRI Certified | Pass |
Benefits of Trubuild Aqualock are -
Quick drying
Easily applied by brush or trowel
Flexible
Excellent adhesion to concrete and masonry substrates
Non-toxic substances
Environmentally friendly - free form Volatile Organic Compounds (VOC)
Can be applied on damp surface
Can withstand positive hydrostatic pressure upto 5 bar and negative hydrostatic pressure upto 3 bar
Trubuild Aqualock is available in the following packaging:
3 Kg
15 Kg
90 Kg
- Concealed roofs, parking decks, bathroom, toilet, kitchen, balconies and planters
- Swimming pools, water tanks and reservoirs
- Concrete foundations, basements wall and lift pits
- Any other concrete, cement or masonry surface subject to damage from moisture
Related Products
